Proliferation and adhesion of fibroblasts in vitro on polylactide films
https://doi.org/10.25789/YMJ.2021.74.20
Abstract
Evaluation of the proliferative activity and adhesive capacity of cultured in vitro fibroblasts on polylactide films of various thicknesses, depending on the presence of an adhesive factor was carried out.
Adding an adhesive factor AF which contains gelatin to the nutrient medium activates the proliferation of cultured cells. The largest number of attached fibroblasts is noted on the 3rd day with substrates of 100 microns and 150 microns in wells with AF, while in substrates with the thickness of 125 microns - on the 1st and 3rd days of cultivation. Based on supravitally stained samples, it was found that the fibroblast adhesion, depending on the thickness of the polylactide film, showed statistically significant differences between films with the thickness of 125 and 100 microns, as well as a tendency to increase between 125 and 150 microns. Only with the polylactide thickness of 125 microns the number of fibroblasts on the surface of the film is higher than in the well, and with other thicknesses the number of cells in the well is greater than on the polylactide.
About the Authors
A. S. GolderovaRussian Federation
Golderova Aitalina Semenovna - MD, professor, Head research laboratory of cell technologies and regenerative medicine
Yakutsk, Sakha Republic (Yakutia), 36 Kulakovskogo St. 677027. Tel: +7 (914) 821-59-98
I. E. Nikolaeva
Russian Federation
Nikolaeva Irina Eduardovna - researcher, research laboratory of cell technologies and regenerative
Yakutsk, Sakha Republic (Yakutia), 36 Kulakovskogo St. 677027. Tel: +7 (914) 106-20-75
N. F. Timofeeva
Russian Federation
Timofeeva Nina Fedorovna - Leading Engineer of the educational scientific and technological laboratory ‘Technologies of Polymers and Nanocomposites’ and Senior Lecturer of the Chemical Department of the Institute of Natural Sciences
Yakutsk, Sakha Republic (Yakutia), 46 Kulakovskogo St. 677013. Tel: +7 (960) 978- 69-59
M. P. Kirillina
Russian Federation
Kirillina Maria Petrovna - candidate of biological sciences
Yakutsk, Sakha Republic (Yakutia), 6/3 Yaroslavskogo St. 677000. Tel: +7 (914) 271-68-81
A. N. Egorov
Russian Federation
Egorov Andrey Nikolaevich - assistant, research laboratory of cell technologies and regenerative medicine
Yakutsk, Sakha Republic (Yakutia), 36 Kulakovskogo St. 677027. Tel: +7 (914) 826-27-23
References
1. Volova TG. Materials for medicine, cellular and tissue engineering: textbook [Electronic resource] / T.G. Volova, E.I. Shishatskaya, P.V. Mironov. - Krasnoyarsk, 2009. - Access mode: http://nashaucheba.ru/docs/18/17894/conv_1/file1.pdf
2. Glotova V.N. Improvement of the technology of synthesis and purification of lactide: dis. ... Cand. tech. Sciences: 05.17.04 / V.N. Glotova; NI TPU; scientific. hands. V.T. Novikov - Tomsk, 2016 . – 129 p.
3. Correction of myelosuppression in rats using the implantation of matrices carrying mesenchymal stem cells / Abdulkina N.G., Zaitsev K.V., Khlusov I.A. [et al.] // Medicine and education. - 2014. - No. 6.- P.
4. Fibroblasts as an object of studying proliferative activity in vitro / Kuzmicheva V.I., Volova L.T., Gilmiyarova F.N. et al. // Science and innovations in medicine. - T.5 (3) .2020.210-214.
5. Disruption of epithelial cell-matrix interactions induces apoptosis. Frisch SM, Francis H // J Cell Biol. 1994 Feb; 124(4):619-26.
6. Effect of structure, topography and chemistry on fibroblast adhesion and morphology. M.A. Mateos-Timoneda, O. Castano, J.A. Planell & Elisabeth Engel Journal of Materials Science: Materials in Medicine volume 25, pages1781–1787(2014).
7. Fibroblast response is enhanced by poly (L-lactic acid) nanotopography edge density and proximity / K.R Milner, C.A Siedlecki // Int J Nanomedicine. 2007 Jun; 2(2): 201–211.
8. Frisch SM, Francis H. Disruption of epithelial cell-matrix interactions induces apoptosis. J Cell Biol. 1994; 124:619–626.
9. Huang SJ. Poly (lactic acid) and copolyesters. In: Bastioli C, editor. Handbook of biodegradable polymers. Shawbury: Rapra Technology; 2005. p. 287–301.
10. Hutmacher D.W., Schantz T., Zein I., Ng K.W., Teoh S.H., Tan K.C. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J. Biomed. Mater. Res. 2001; 55(2): 203–216. DOI:10.1002/1097-4636(200105)55:23.0.CO;2-7
11. Jorge P., Domingos M., Gloria A., Ciurana J. BioCell printing: Integrated automated assembly system for tissue engineering constructs. CIRP Annals – Manufacturing Technology. 2011; 60 (1): 271–274. DOI: 10.1016/J.CIRP.2011.03.116.
12. Uttayarat P, Toworfe GK, Dietrich F, et al. Topographic guidance of endothelial cells on silicone surfaces with micro- to nanogrooves: Orientation of actin filaments and focal adhesions. J Biomed Mater Res A. 2005;75A:668–80.
13. Zhong S.P., Zhang Y.Z., Lim C.T. Tissue scaffolds for skin wound healing and dermal reconstruction. Wiley Interdiscip Rev Nanomed Nanobiotechnol 2010; 2(5): 510–525.
Review
For citations:
Golderova A.S., Nikolaeva I.E., Timofeeva N.F., Kirillina M.P., Egorov A.N. Proliferation and adhesion of fibroblasts in vitro on polylactide films. Yakut Medical Journal. 2021;(2):82-85. https://doi.org/10.25789/YMJ.2021.74.20